Crazy New Mexico critters

Saw this crazy critter this morning and was able to snap a picture as I ran from it. It's ok, you may laugh at me, but I've never seen one of these and thought it might have been a large wasp of some kind. I didn't know if it was poisonous or if it just enjoyed chasing me back to my truck. Definitely made for an interesting morning.

Albuquerque, NM

About to be on my way to the Silver Spur gun show in Albuquerque. The drive is only a couple hours longer than the drive to Vegas, but should be an awesome show.

Hope to see you all there. Stop by and visit me at the GUN JUICE booth.

"Rust Prevention" A one time cure

I get tons of people complaining about their guns & knives constantly rusting and corroding due to humidity, sweat, corrosive ammo, etc. But when I start telling them about my products I get "I have something similar", "That stuff never works", "Its just teflon or silicon". Well I'm here to set the record straight. Microlon Gun Juice is not similar to what you have tried in the past (its a one time application). Microlon Gun Juice does work (very well I might add). Finally Gun Juice does not contain teflon (also known as PTFE), silicon, graphite, or moly (molybdenum disulfide). All of those things build-up in some areas and wear off in others.

The way Gun Juice differs is that it is a one time application dry film lubricant and can be used on any metal surface to prevent rust and corrosion. After using Gun Juice you are able to conceal carry with the confidence that sweat won't damage your gun (if you followed the directions). If you are already using our products feel free to let your friends know how well it works. If you haven't used it yet feel free to buy some from our site, it comes with a lifetime money back guarantee. http://www.FirearmSystems.net

How to Treat Your Firearm with Microlon Gun Juice

www.FirearmSystems.net to check out more products.

The advanced technology formula in Microlon Gun Juice cleans and protects your firearms. First it will remove all but the most stubborn fouling from your gun’s bore which then allows the protective micro-thin dry-film lubricant particles to impregnate the metal pores. You will notice smoother operation of all moving parts, an increase in muzzle velocity and improved firing accuracy and consistency. The dry film lubricant will also help prevent rust and corrosion to your weapon, and because Gun Juice is NOT a gun oil, your weapon will not attract damaging dirt, dust or grit.

GENERAL APPLICATION FOR ALL FIREARMS

1. SHAKE WELL! This is extremely important because the lubricating resins in the formula can settle and separate during shipping or storage.

2. Clean the bore of the weapon thoroughly to remove copper, lead and carbon deposits using either Microlon Gun Juice, which is an excellent cleaner, or the product you currently use. We recommend using Gun Juice with a bore brush because it not only removes fouling from your gun's bore but it prepares the metal to receive the protective, microscopic dry film lubricant resins found in the formula.

3. After cleaning, wet a patch with the Microlon Gun Juice and pull it the length of the inside of the barrel.

4. Fire the weapon and then pull another patch through the bore. It is important to fire the weapon while the Gun Juice is still wet, since this will more evenly distribute the resin into the metal of the bore!

5. Repeat until 8-10 patches with Gun Juice have been pulled the length of the barrel and the weapon has been fired 10 times. Stainless Steel requires 20 patches, due to its tighter structure.

6. Re-sight the weapon, if possible.

7. Microlon Gun Juice may be applied to all moving parts of the firearm by wiping and polishing the parts with a soft cloth moistened with Gun Juice. Heat external metal with a hair dryer or heat gun and work Gun Juice into the metal using a soft cloth or chamois.

ADDITIONAL APPLICATIONS FOR SPECIFIC WEAPONS

Revolvers. In addition to performing steps 1- 7, apply Gun Juice to the center rod to lubricate the cylinder and make it spin more easily. Just raise the barrel in the air and add a few drops to the rod and spin. Repeat as necessary for ease of operation. Also use Gun Juice to clean and treat the individual chambers to ease insertion of shells and to protect the metal surfaces.

Semi-automatics. In addition to performing steps 1- 7, apply Gun Juice to lubricate the slide to improve the slide action. With locks, and other weapons using Tennifer, the slide or any parts treated with the Glock Tennifer process, Microlon Precision Oiler or Microlon Assembly Lube should be used. Wipe away any excess oil or grease after the slide is sufficiently lubricated.

Rifles and Shotguns. In addition to performing steps 1- 7, apply Gun Juice on rifle bolts, levers, hammers, triggers, and pump-guides on shotguns. It is important to operate moving parts while still wet with Gun Juice so that the resin distributes evenly throughout the metal pores.

CAUTION: Do not let Microlon Gun Juice stand on finished wood surfaces. If possible, remove non-metal parts while cleaning weapons. Wipe excess liquid from wood surfaces promptly. Do not leave container open for extended periods as Microlon Gun Juice will evaporate quickly, reducing its penetrating properties. Any parts treated with the Glock Tennifer process should be treated with Microlon Precision Oiler or Microlon Assembly Lube. Always observe proper gun safety.

NOTE: If you purchased Gun Juice Sportsman’s Kit, you may use the Assembly Lube on all sliding parts of a weapon, such as the guides for the slide mechanism on a semi-automatic, or the pump guides of a shotgun. Excess Assembly Lube should be removed with a soft, dry cloth before using the weapon.

Firearms, Microlon, gun juice, Sportmans, sportman's, kit, lube, gun, lubricant, dry film, one time, treatment, metal, CL-100, MIL

How to Treat Your Engine with Microlon Engine Treatment (Instructions)

www.FirearmSystems.net to check out more products

Microlon Treatment Instructions

This is the only set of instructions you will need to install Microlon Metal Treatment into your car or truck. The Engine Only treatment instructions are covered step-by-step on this page. All other applications are covered on the back. It is recommended that you carefully read all instructions prior to installation.

Procedure

1) Oil Change.  Change your oil before installing the Microlon Engine Treatment. After treating your engine with Microlon, do not change the oil for at least 1,000 miles. Regular oil change in accordance with your vehicle’s recommended schedule is best.

2) Shake well. Shake Microlon products thuroughly before adding to engine. The Microlon resin is held in suspension only after being shaken up from the bottom of the can. Start engine and let it run until it reaches normal operating temperature.

3) Add 4 0z. Microlon Fuel Treatment.  Microlon liquid treats the top of your engine through the fuel system. Make sure to shake the Fuel System Treatment well before adding to the fuel tank.

4) Add Microlon to the crankcase.  Microlon liquid treats your engine through the oil. If you are comfortable working on your own car, go to Method #1. If not, go to Method #2.

Method #1

The Microlon Treatment works best when added to a running engine.  To add Microlon to a running engine, use the injector bottle included with the kit to add Microlon fluid through the dipstick opening.

OR

Method #2

Start the engine and run until warm, stop the engine, and pour Microlon liquid into the oil through the opening on top of the engine, then restart.

Cubic Inches             Liters                            Microlon Liquid              Fuel System Treatment

less than 125              less than 2                      16 ounces                        4 ounces

125 through 360          2 through 5.8                  32 ounces                        4 ounces

360 through 500          5.8 through 8                  40 ounces                        4 ounces

5) Drive your car for at least one hour.  The Microlon treatment needs this time to cleanse the engine so that the film that provides the savings and protection can form in the engine.

The Microlon Metal Treatment will not harm an engine when used according to instructions.  Please observe all safety precautions when working on your vehicle.

Microlon Treatment Instructions

Your service station  mechanic may more conveniently install these Microlon treatments during a regular oilchange.  However, if you are confident working on your own car, we have provided an easy-to-use pour spout and easy-to-follow instructions.  You will find it useful to have on hand a pair of pliers, a flat-blade screwdriverand a hammer to remove the tops of the cans, and a funnel with which to pour the treatment.

Automatic Transmission.

1) Shake the Automatic Transmission Treatment thoroughly.

2) Add the entire contents through the transmission fluid filler opening. It may be necessary to remove some of the fluid from the Automatic Transmission Reservoir before adding Microlon Automatic Transmission Treatment.

Manual Transmission.

1) Shake the Compound 90 thoroughly, until it is an even color.

2) Add the entire contents to the transmission gear box. It may be necessary to remove some of the fluid from the Manual Transmission Reservoir before adding Microlon Compound 90.

Differential.

1) Shake the Compound 90 thoroughly, until it is an even color.

2) Add the entire contents to the differential gear box.It may be necessary to remove some of the fluid from the differential before adding Microlon Compound 90.

Power Steering Treatment.

1) Shake the 2 0z Power Steering Treatment well.

2) Add the entire contents to the power steering unit using the injector bottle.  Consult your owner’s manual for location of the filler opening.It may be necessary to remove some of the fluid from the power steering reservoir before adding the Power Steering Treatment to avoid overflow.

Wheel Bearing Treatment.

Pack the wheel bearings with Microlon High Temperature Bearing Grease.  Consider using any remaining grease on trailer wheel bearings

microlon, high-performance, racecar, aircraft, transmission, horsepower, autos, aircraft, firearms, metal treatment, gun treatment, engine treatment, CL-100, MIL